The TTLM I/O load module is designed for critical force measurement applications where accuracy, extreme stability, and dependable noise rejection is essential. The signal conditioner is a load measurement device. The TTLM is used as an analog output (+/- 10 VDC), from a peak hold circuit, to be used with PLCs and other data acquisition systems. These systems will provide the display and alarm control functions.

The TTLM has high sensitivity levels that work well in an electrically "noisy" environment. It has two amplifier gain ranges (span ranges) and can accept either weak or strong signals from the load sensor.

The TTLM module is available either in an AC version [customer selectable between 110V and 220V] or a 24 VDC version, depending on the power source the customer wishes to use. The 24 VDC version is certified to be in conformance with European CE standards. Either version is available in one, two or four channels.

• Signal conditioning module for strain gage sensors & load cells
• Four independent channels for accommodating up to eight sensors
• Uses full-bridge sensors from 120 Ohms to 1,000 Ohms
• Plug-in connectors are used for the sensor inputs
• High/low sensitivity span ranges selected with front panel switch
• Power input/output are plug-in connectors
• Built-in automatic peak load memory circuits
• Peak measurements are made with an external trigger device
• Built-in power supply for stable operation and noise rejection
• Compact size to fit almost any location
• Steel enclosure for maximum protection and noise rejection
• From one to eight sensor inputs, one or two per channel
• Analog output terminals