 |
 |
 |
The Quik-Learn automatic tonnage monitor is important for die setup,
SPC work, quality assurance and effective monitoring. Protecting investments, reducing downtime
and improving productivity and product quality are all benefits of using the Quik-Learn. |
|
The Quik-Learn tonnage and deviation monitor is easy-to-use and inexpensive.
All of the operator information and controls are on the front panel. There is no need to study
manuals or undergo extensive training. |
|
| The Quik-Learn can display the forming stroke in three ways: |
|
- Quik-Learn Run... automatic monitoring mode, press overload & working tonnage alarms active
- Set Up Press (peak tons)... displays peak tonnage reached during each press stroke, press overload alarms active
- Set Up Press (track tons)... displays "track" tonnage as the press goes through the forming stroke, press overload alarms active
|
| Features |
|
- Left, right, & total tonnage display
- Deviation from tonnage setup
- Displays tons or percent deviation
- High & low tonnage display
- Target Tonnage Indicator lights
- Capacity & working tonnage alarms
- Low alarms may be disabled
- Automatically sets benchmark tonnage
- View calibration numbers
- Percent of benchmark setpoints
- Percent of capacity setpoints
- Displays alarm setpoints
- Accepts two or four sensor inputs
- Analog output jacks
- Standard RS-485/232 serial port
|
|
| Options: |
|
- Part counter or Reverse load
- AutoLearn
- Key reset
- Flushmount kit
- Overload counts
- Time based signatures
- Pressroom networking
|
|
|
