| Die Protection |
|
| Inputs |
4 |
| Sensor Type |
Momentary, maintained, static, scan part, NO or NC |
| Built-in Power For Sensors |
24VDC @ 2 Amp power supply |
| Tonnage Monitoring |
|
| Channels |
2 |
| Sensor Inputs |
Full bridge strain gages, 120 to 1,000 ohms, up to (4) 350 ohm sensor inputs |
| Sensor Excitation |
Built-in 10VDC @ 125mA max. (short circuit protected) |
| Automatic Zero Balance |
Yes |
| Balance Range |
+/- 1mV/V of offset |
| Gain Range |
Low Gain = 0.568mV/V to 5.000mV/V
High Gain + 0.057mV/V to 0.625mV/V |
| Analog Output |
.25" stereo phono jack
2.5VDC at press capacity |
| Inaccuracy |
+/-1% of full scale max |
| Non-Linearity |
+/-.1% of full scale max |
| Frequency Response |
Every stroke (up to 2 updates per second max) |
| Display Update |
Every stroke (up to 2 updates per second max) |
| Resolution |
1 Meg Ohm .1% precision resistor |
| Calibration Shunts |
1 Meg Ohm .1% precision resistor |
| Computer Interface |
RS-485/232, PressNet & TT Graph compatible |
| PLS |
|
| Outputs |
5 |
| Position Output |
Up to 2 on/off windows, speed compensation individually at on/off position |
| Timed Output |
1 to 9,999ms |
| Speed Compensation |
Individual speed compensation value for each output |
| Mechanical Relay |
NO and NC contacts, 10 AMP @ 250VAC, 10 AMP @ 30VDC |
| Solid State Relay |
NO contact, 3 AMP @ 140VAC |
| Motion Detect |
|
| Start Time Limit |
125ms, 250ms, 375ms or 500ms |
| Dual Safety Valve Input |
110VAC |
| Shutdown Relays |
|
| Top Stop & E-Stop |
Same type as PLS |
| Display |
|
| Bright Fluorescent |
Dot matrix 20x24 characters |
| Bright 7-Segment LED |
.56" H, 3 1/2 digit per channel |
| LED Bar Graph |
5 LEDs per channel for tons |
| General |
|
| Power Requirements |
90 Watts max, 85-132VAC @ 50-60Hz OR 170-264VAC @ 50-60Hz |
| Operating Temperature |
0-70 degrees Celsius |
| Dimensions |
12.5"x14.5"x6.68"D |
